QEMU

QEMU#

1. 安装依赖包#

sudo apt update
sudo apt install -y \
  git build-essential ninja-build pkg-config \
  libglib2.0-dev libpixman-1-dev libslirp-dev \
  make libssl-dev zlib1g-dev libbz2-dev libreadline-dev \
  libsqlite3-dev wget curl llvm libncursesw5-dev xz-utils tk-dev \
  libxml2-dev libxmlsec1-dev libffi-dev liblzma-dev \
  libncurses5-dev texinfo \
  gcc-riscv64-unknown-elf opensbi u-boot-qemu \
  expect libgmp-dev libmpfr-dev libmpc-dev bison flex

# 提供 clang/make/git 等基础工具链
xcode-select --install   # 如果已装过会报已存在，忽略即可

# 先确认已安装 Homebrew：https://brew.sh
brew update
brew install -y \
  git ninja pkg-config \
  glib pixman libslirp \
  openssl readline sqlite \
  wget curl llvm \
  xz \
  libxml2 libxmlsec1 libffi \
  gmp mpfr libmpc bison flex \
  gdb \
  coreutils \  # 提供 gnproc，替代 Linux 的 nproc
  texinfo # for makeinfo

# RISC-V 交叉编译工具链 + 固件（对应原来的 gcc-riscv64-unknown-elf / opensbi / u-boot-qemu）
brew tap riscv-software-src/riscv
brew trust riscv-software-src/riscv
brew install -y riscv-tools    # 内含交叉 gcc/binutils；opensbi、u-boot 需另行编译或从官方 release 下载二进制

2. 用 pyenv 管理 Python 版本#

curl https://pyenv.run | bash

echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.bashrc
echo 'command -v pyenv >/dev/null || export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.bashrc
echo 'eval "$(pyenv init -)"' >> ~/.bashrc
source ~/.bashrc

brew install -y pyenv

# macOS 默认 shell 是 zsh，配置文件是 ~/.zshrc（如果你确实用 bash，改成 ~/.bash_profile）
echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.zshrc
echo 'command -v pyenv >/dev/null || export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.zshrc
echo 'eval "$(pyenv init -)"' >> ~/.zshrc
source ~/.zshrc

安装 Python 3.10

注意加 --enable-shared：后面编译 gdb 需要共享库（libpython3.10.so / .dylib）才能启用 gdb 的 Python 脚本支持，pyenv 默认编译是静态库，不加这个选项 gdb 编译时会检测不到可用的 Python。

PYTHON_CONFIGURE_OPTS="--enable-shared" pyenv install 3.10.14

# macOS 上还需显式把 openssl/readline/sqlite 的 brew 路径喂给编译器，否则容易缺依赖
export LDFLAGS="-L$(brew --prefix openssl)/lib -L$(brew --prefix readline)/lib -L$(brew --prefix sqlite)/lib"
export CPPFLAGS="-I$(brew --prefix openssl)/include -I$(brew --prefix readline)/include -I$(brew --prefix sqlite)/include"
export PKG_CONFIG_PATH="$(brew --prefix openssl)/lib/pkgconfig:$(brew --prefix readline)/lib/pkgconfig:$(brew --prefix sqlite)/lib/pkgconfig"

PYTHON_CONFIGURE_OPTS="--enable-shared" pyenv install 3.10.14

pyenv global 3.10.14      # 设为全局默认；只想局部生效改用 pyenv local
python --version          # 验证：应输出 Python 3.10.14

3. 从源码编译 QEMU#

# 下载源代码
git clone https://gitlab.com/qemu-project/qemu.git
cd qemu
git checkout v11.1.1    # 或用 master 拿最新版
git submodule update --init --recursive

# 安装依赖
pip install tomli sphinx_rtd_theme

# 编译和安装
mkdir build && cd build
../configure --target-list=riscv64-softmmu,riscv32-softmmu
make -j"$(nproc 2>/dev/null || sysctl -n hw.ncpu)"
sudo make install
cd ../..
qemu-system-riscv64 --version

# 下载源代码
git clone https://gitlab.com/qemu-project/qemu.git
cd qemu
git checkout v11.1.1    # 或用 master 拿最新版
git submodule update --init --recursive

# 安装依赖
pip install tomli sphinx_rtd_theme

# 编译和安装
export LIBRARY_PATH="$(brew --prefix)/lib${LIBRARY_PATH:+:$LIBRARY_PATH}"
mkdir build && cd build
../configure --target-list=riscv64-softmmu,riscv32-softmmu
make -j"$(nproc 2>/dev/null || sysctl -n hw.ncpu)"
sudo make install
cd ../..
qemu-system-riscv64 --version

4. 从源码编译 GDB#

git clone https://sourceware.org/git/binutils-gdb.git
cd binutils-gdb
git checkout gdb-17.2-release   # 或用 master 拿最新版

mkdir build && cd build

../configure --target=riscv64-unknown-elf \
             --enable-multilib \
             --disable-werror \
             --with-python=/usr/bin/python3 \
             --enable-tui=yes

../configure --target=riscv64-unknown-elf \
             --enable-multilib \
             --disable-werror \
             --with-python="$(pyenv root)/versions/3.10.14/bin/python3" \
             --enable-tui=yes \
             --with-gmp=/opt/homebrew/opt/gmp \
             --with-mpfr=/opt/homebrew/opt/mpfr

make -j"$(nproc 2>/dev/null || sysctl -n hw.ncpu)"
sudo make install
cd ../..
riscv64-unknown-elf-gdb --version

5. 配置 gdb 美化输出#

cp ~/.gdbinit ~/.gdbinit.bak 2>/dev/null
wget -P ~ https://git.io/.gdbinit

6. riscv64-unknown-elf-gdb 调试#

1、下载源代码，编译，用 QEMU 启动 kernel.elf 并等待 GDB

git clone https://github.com/zhyantao/baremental.git
cd baremental
make debug

2、新开一个终端，用 GDB 连接调试

cd baremental
riscv64-unknown-elf-gdb kernel.elf
(gdb) target remote localhost:1234
(gdb) break _start
(gdb) continue
(gdb) next    # 输入一次 next 后持续按 Enter 就能重复 next 指令了
Contents